How to Patch Drywall - California Method 1

How to Patch Drywall – California Method

Happy Monday,

  • Uber lays off 3,000 more employees, closes dozens of offices.
  • A potential Covid-19 vaccine, developed by Moderna, showed positive results in a phase 1 trial.
  • Using bankruptcy to turn around its business, JCPenney plans to close roughly 200 stores this year with an additional 50 stores in 2021.

Did you swing your door open too hard? Maybe you were moving furniture and someone miscalculated a turn. Or you tripped and fell, putting a hole in your drywall. Either way it happened; we won’t tell Mom.

Drywall is composed of a solid gypsum core extruded between thick sheets of facer and backer paper. This means that while drywall is a phenomenal construction material, it’s relatively weak as compared to its counterparts. Since drywall is very prone to damage, it’s a good idea to know how to repair it…unless you want to pay a handyman.

Don’t worry visual learners, we’ll be linking a video.

California patch

A great method for patching holes 6 inches and smaller is the California patch. First, you’ll want to cut a square piece of drywall that’s roughly 2 inches bigger than the hole. Turn the drywall piece over and score the drywall an inch from each side. Leaving the paper untouched, make sure to carefully remove ONLY the drywall you’ve cut.

Once you’ve got a drywall piece with an inch of extra paper on each side, place it over the hole (so it’s completely covering the hole) and make an outline on the wall using a pencil. Using a drywall saw, you’ll want to cut out the marked area; don’t forget your safety gear!

Now that you’ve cut out the outline, you’ll want to flip the drywall piece over and apply joint compound to the back of the paper. Press the drywall into the outline and cover it with a couple of coats of drywall compound. Finally, sand, prime and paint the area. Voila!

Recap

Thank you for reading our weekly blogs. Please reach out with topics you would like us to tackle in our future blogs!